303 reload

[Dellboy]

just setting up to reload some ppu cases in 303
what primers and powder would anyone recommend please

[Blu]

Dellboy, I use PPU cases in my Enfields as well. What weight bullet will you be using?

[Steve E]

PPU brass, (or HXP if you have some new/once fired)Remington 9 ½ primers, TR140 or N150 for powder. Sierra 174 Smk's (or PPU 174 if you really have to). Neck size only using RCBS neck die as I find that it is more consistent than the Lee Collet die in my rifles.
If you want load data PM me, I will not give load data over an open forum.

[saddler]

Next batch I make will possibly be made using Nobel Rifle 1...coz I have lots

[Alpha1]

I use PPU brass a 174grain bullet with any primers I can get my hands on cheaply. I use 41grains of Vitavouri N140. It works fine in all my 303 rifles. Iv used this load data for years with out any issues in MY RIFLES.

[WelshShooter]

Tr140 / RS50 and Ramshot Big Game give me good results. Try Accurate 5744 if you want reduced loads (about 27gr but check a manual).

[toffe wrapper]

PPU brass
174 match king
CCI LR primer
44 grains BLC2
2385 fps

[Maggot]

PPU brass, (or HXP if you have some new/once fired)Remington 9 ½ primers, TR140 or N150 for powder. Sierra 174 Smk's (or PPU 174 if you really have to). Neck size only using RCBS neck die as I find that it is more consistent than the Lee Collet die in my rifles.
If you want load data PM me, I will not give load data over an open forum.

Ha, nice one Steve...yes sometimes you do really have to, they were all I could get (although I have found some sierras now....thankfully, not sure it would help with my shooting though).