Page 1 of 4
Chamber Honing?
Posted: Mon Nov 17, 2014 10:26 pm
by SevenSixTwo
Has anyone here had any experience polishing a chamber with one of those Flex-Hone tools?
Chambers shouldn't be ribbed, should they?
Any other suggestions for DIY polishing?
Re: Chamber Honing?
Posted: Mon Nov 17, 2014 11:37 pm
by Alpha1
Not enough info. What type of chamber are we talking about.
Re: Chamber Honing?
Posted: Tue Nov 18, 2014 12:19 am
by SevenSixTwo
AKM 7.62x39.
Re: Chamber Honing?
Posted: Tue Nov 18, 2014 12:25 am
by Alpha1
What makes you think its ribbed.
Re: Chamber Honing?
Posted: Tue Nov 18, 2014 12:30 am
by SevenSixTwo
I can see it.
Seriously; the tooling is fairly pronounced and I'd like it polished - or at least at a stage where stuck cases aren't an issue.
Re: Chamber Honing?
Posted: Tue Nov 18, 2014 2:00 am
by saddler
Ribbed, for her pleasure ribbed, or HK G3 fluted type ribbed?
That said, it's an AK you're talking about.
Break out a chamber stick, an electric drill, some wire wool & a couple of drops of oil....then have at it
Re: Chamber Honing?
Posted: Tue Nov 18, 2014 8:43 am
by SevenSixTwo
saddler wrote:Break out a chamber stick, an electric drill, some wire wool & a couple of drops of oil....then have at it
That's been suggested. I'm a DIY kinda guy and if I can avoid handing it to a gunsmith for several weeks (and several hundreds of quid, probably) then I'll do so! I'm assuming the wire wool will conform to the taper ok?
Re: Chamber Honing?
Posted: Tue Nov 18, 2014 9:01 am
by Sandgroper
SevenSixTwo wrote:saddler wrote:Break out a chamber stick, an electric drill, some wire wool & a couple of drops of oil....then have at it
That's been suggested. I'm a DIY kinda guy and if I can avoid handing it to a gunsmith for several weeks (and several hundreds of quid, probably) then I'll do so! I'm assuming the wire wool will conform to the taper ok?
I think Saddler's sarcasm flew right over the top and missed completely!
Do you reload for the rifle and if so, have you had any issues with it as it is? If you post some pictures of the brass it might also give a better idea of the problem.
Re: Chamber Honing?
Posted: Tue Nov 18, 2014 9:04 am
by SevenSixTwo
Sandgroper wrote:I think Saddler's sarcasm flew right over the top and missed completely!
No, not really. It's a method suggested on many firearms message boards.
Re: Chamber Honing?
Posted: Tue Nov 18, 2014 9:17 am
by Sandgroper
The sarcasm I saw, was Saddler's comment "That said, it's an AK you're talking about."
Anyway, it's not a method I would try as I feel it would be too easy mess up to the chamber completely as the steel wool is not rigid like a reamer and could confirm to any shape depending on how pressure is applied.
One of my rifle has some chattering marks in the shoulder of the chamber but it doesn't effect performance or my reloading for it.