Page 1 of 1
Accessory rail - bipod and sling fitments
Posted: Wed Nov 05, 2014 8:20 pm
by meles meles
oomans, our M28/76 has two accessory rails, one beneath the fore-end of the stock and one on the side of the fore-end. These are the aluminium variety , inlet into the wood, with a dovetail profile - the sort seen on many target rifles.
Do you know where we can either get a bipod that slots into them, or an adapter to allow a Harris style bipod to be used with them? And a sling swivel too?
Re: Accessory rail - bipod and sling fitments
Posted: Wed Nov 05, 2014 8:34 pm
by saddler
Finland
Re: Accessory rail - bipod and sling fitments
Posted: Wed Nov 05, 2014 8:35 pm
by DW58
Dear Mr Monochrome Mustelid
Assuming it's an Anschutz type rail, there are adaptors available - I think from Harris themselves - try ebay or dealers such as Tacfire or similar.
This is the Jobby-doofer-thingy-whatsit that you need,
damned if I can remember the part number, sorry.
Re: Accessory rail - bipod and sling fitments
Posted: Thu Nov 06, 2014 12:11 pm
by DW58
It's Harris's adaptor #6 that you need.
See
ebaY - here £17.99
Re: Accessory rail - bipod and sling fitments
Posted: Thu Nov 06, 2014 6:24 pm
by meles meles
And £6.99 in many other places ...
Re: Accessory rail - bipod and sling fitments
Posted: Thu Nov 06, 2014 8:42 pm
by DW58
I'm not surrised at that, my aim was solely to show you which adapter was suitable for the Mustelid's rifle as per your request.