The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

The GB outlet for the 'Reload Swiss' Nitrochemie powders range has got its website going, at the moment really on a 'watch this space' basis with promotional video, plus a sign-up to news facility for you to be advised of things as they unfold.

http://www.propellants.co.uk/

This is Nigel Cole-Hawkins of TR140 / Elcho 17 repute, recently appointed as the UK distributor and now beavering away setting up a retail network and commissioning load development / pressure testing. (I'm told the existing Swiss loads data is thin to non-existent, so it's a near start from scratch job.)

Laurie wrote:The GB outlet for the 'Reload Swiss' Nitrochemie powders range has got its website going, at the moment really on a 'watch this space' basis with promotional video, plus a sign-up to news facility for you to be advised of things as they unfold.

http://www.propellants.co.uk/

This is Nigel Cole-Hawkins of TR140 / Elcho 17 repute, recently appointed as the UK distributor and now beavering away setting up a retail network and commissioning load development / pressure testing. (I'm told the existing Swiss loads data is thin to non-existent, so it's a near start from scratch job.)

:shakeshout: :goodjob: :goodjob: :goodjob: :cheers:

I'll be interested in a 4831sc substitute for my straight .284

Alan

Looking forward to the Reload Swiss powders with considerable interest.

Can somebody please provide contact details for Mr Cole Hawkins?

DW58 wrote:Looking forward to the Reload Swiss powders with considerable interest.

Can somebody please provide contact details for Mr Cole Hawkins?

I have provided it enough times in recent threads about Varget replacement.
This is the last time I will provide it commonside@compuserve.com

Terribly sorry for troubling you, apologies for causing you such inconvenience.

It just happens that as I don't use Varget, I hadn't read the threads and thus didn't see your previous posts.

I'll be sure to pay full attention in future tongueout

DW58 wrote:Terribly sorry for troubling you, apologies for causing you such inconvenience.

It just happens that as I don't use Varget, I hadn't read the threads and thus didn't see your previous posts.

I'll be sure to pay full attention in future tongueout

Good man, that's the spirit smile2

Steve E wrote:

DW58 wrote:Looking forward to the Reload Swiss powders with considerable interest.

Can somebody please provide contact details for Mr Cole Hawkins?

I have provided it enough times in recent threads about Varget replacement.
This is the last time I will provide it commonside@compuserve.com

After some seious Internet sleuthing I found that the site in post 1 of this thread also has a big 'Contact us' link which leads to an email address.

DW58 wrote:Looking forward to the Reload Swiss powders with considerable interest.

Can somebody please provide contact details for Mr Cole Hawkins?

You could simply use the contact us link on the website.

Dreadfully sorry for the major crime I seem to have committed - was it so much trouble, really?

Some people really need to get out more, spend less time on the forum and more on the range.

:roll: