Much to my surprise I couldn't because the priming chamber on my new Lee Loader, although otherwise perfect, is made to take a small rifle primer.
It could maybe be used to load Lapua Palma 308 but I haven't got any..... Boo
Small primer 308 Lee Loader?
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Flanker
Small primer 308 Lee Loader?
I got a new Lee Loader today with my Xmas pennies and sat down to make a batch of bullets.
Much to my surprise I couldn't because the priming chamber on my new Lee Loader, although otherwise perfect, is made to take a small rifle primer.
It could maybe be used to load Lapua Palma 308 but I haven't got any..... Boo
Much to my surprise I couldn't because the priming chamber on my new Lee Loader, although otherwise perfect, is made to take a small rifle primer.
It could maybe be used to load Lapua Palma 308 but I haven't got any..... Boo
Re: Small primer 308 Lee Loader?
That is very odd, I do not have a Lee Loader to check with however they have certainly worked for LR primers in the past.
-
dromia
- Site Admin
- Posts: 20226
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Small primer 308 Lee Loader?
Sounds like Lee's non existent quality control, I'd return it and get one with the correct parts.
I have an old target loader, an old standard loader, both in the cardboard boxes and a newer version in the plastic box in 308 and they all have the large primer parts.
I have an old target loader, an old standard loader, both in the cardboard boxes and a newer version in the plastic box in 308 and they all have the large primer parts.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
Flanker
Re: Small primer 308 Lee Loader?
I have a 223 and 303 Lee Loader. In both the priming chamber is the expected size. This one is definitely for small primer I measured the hole with my micrometer.
I've written to Lee Precision to ask for a replacement part. Maybe they'll let me keep the other one as a curio.
I don't suppose many people load Lapua Palma with a Lee Loader.
I've written to Lee Precision to ask for a replacement part. Maybe they'll let me keep the other one as a curio.
I don't suppose many people load Lapua Palma with a Lee Loader.
-
Flanker
Re: Small primer 308 Lee Loader?
:goodjob: No quibble at all from Lee Precision, they're sending me a new priming chamber.
Who is online
Users browsing this forum: Google [Bot] and 2 guests