Page 1 of 3
AIAW Moderator
Posted: Thu Jun 20, 2013 7:04 pm
by pe4king
Leftover from the sale of my AW is a Sporting services moderator to fit the tactical threaded muzzle brake.
Made by MAE New Zealand has had about 500rds through it in good condition £100
Pics on request
Re: AIAW Moderator
Posted: Thu Jun 20, 2013 8:40 pm
by ovenpaa
Pics please.
Re: AIAW Moderator
Posted: Thu Jun 20, 2013 9:24 pm
by pe4king
Re: AIAW Moderator
Posted: Fri Jun 21, 2013 11:07 am
by 7mm longrangesniper
Hi Mate
What thread is the mod please.Thank You.
Regards
Steve
Re: AIAW Moderator
Posted: Fri Jun 21, 2013 7:04 pm
by pe4king
7mm longrangesniper wrote:Hi Mate
What thread is the mod please.Thank You.
Regards
Steve
ooh now you got me. its the weird left hand thread for the AI tactical threaded brake, I shall endeavour to find out though.
Re: AIAW Moderator
Posted: Fri Jun 21, 2013 7:22 pm
by 20series
pe4king wrote:7mm longrangesniper wrote:Hi Mate
What thread is the mod please.Thank You.
Regards
Steve
ooh now you got me. its the weird left hand thread for the AI tactical threaded brake, I shall endeavour to find out though.
It looks like my PES-T12 i had on my Remmy set up
Re: AIAW Moderator
Posted: Fri Jun 21, 2013 9:41 pm
by M41B
Would it be proofed for 300 win mag, if so I would be interested .....
Mat
Re: AIAW Moderator
Posted: Sat Jun 22, 2013 9:12 am
by pe4king
M41B wrote:Would it be proofed for 300 win mag, if so I would be interested .....
Mat
Mat
It is on my ticket as a .308 and stamped 7.62x51 on the mod and is not actually proofed.
Personally as far as a mod goes I cant see why it couldn't be used on a .300 winmag its the same sized bore, although I will prepare to be corrected.
But if you look on the website
http://www.jmsarms.com/suppressors.php the PES12 standard ranges from .17 to.308 and the Large ranges from .223 to 30.06 there is no specific mod for a .300, however the standard is 210 grams heavier than the large go figure eh
Kev
Re: AIAW Moderator
Posted: Sat Jun 22, 2013 10:28 am
by pe4king
Edit to add I can see no actual proofhouse marks on it but it is stamped 7.62 nato
Re: AIAW Moderator
Posted: Sat Jun 22, 2013 10:47 am
by 7mm longrangesniper
Hi Mate
It looks as though your A I barrel would be threaded in one of the two configurations either , do you not know any one who has some thread gauges to check it for you.
UK barrels
****** M18 X 1.5
AI AW barrels
*****3/4 X 24
Some of the aftermarket brakes are made in M24 X 1 like the ones from Grizzly Gun Works.
I did find out how ever that some companies make accessories for the A I like the Brügger and Thomet suppressor has a M18x1.5 LEFT handed thread, it could be that they have a European Version withe the L/H thread in M18 X 1.5.
Some of the larger barreled F Class Rifles are threaded 3/4 X 28 which is a finer thread !
What Proofing marks are on your barrel , this will tell us what it should be, I now know where you get the idea about the L/H thread ?
See pictures included. Hope this assist you.
Regards
Steve
