Page 1 of 1

Advice needed for N140 loading

Posted: Fri May 17, 2013 10:13 am
by whoowhoop
Hi
I am looking for recommendations for loads for a 243.
I will be loading Berger 65g.
I have previously loaded 62g Varmint Grenades over 41g of N140, and been very pleased with the results.

I cannot find a load for the 65g Berger, and if I look at 70g loads,the Lee manual gives 38.7 - 43.2 g
but Lapua says 41.0 - 44.5.
Any advice would be welcome.
I know that this is probably not the best powder choice, but it is what I have available.


thanks
Mark

Re: Advice needed for N140 loading

Posted: Fri May 17, 2013 10:42 am
by ovenpaa
Around 39.3 grains of N140 built to 2.710" will keep you at just under 1000m/s for MoD legal ranges. For non MoD range work you can go as far as 43.5ish grains of N140 according to QuickLoad.

I will email you the data.

Re: Advice needed for N140 loading

Posted: Fri May 17, 2013 11:04 am
by whoowhoop
Thanks David
That should keep me on the straight and narrow.