Forster priming tool
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Forster priming tool
Any body had any experience of the Forster bench mounted priming tool.
Re: Forster priming tool
I know of one person with one and I suspect it is no longer used these days. I prefer hand priming tools. The Bald Eagle is very good and I have worked on a couple of my own design in the past.
Oddly enough it is a set of modified RCBS hand primers I use most of the time.
Oddly enough it is a set of modified RCBS hand primers I use most of the time.
Who is online
Users browsing this forum: No registered users and 5 guests