The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

I also throw a lot of my charges, just depends on the level of consistency you need.

I find that the smaller charges need to be more accurately weighed than the larger ones for consistent velocities especially in the 1200-1800 fps range with fastish rifle powders.

Hmmm, the consensus seems to be that RCBS is a good choice. We're going to use the powder thrower and scales at first, but longer term we're torn between the Chargemaster / Lyman G6 elektrikkeral scales and a Target Master used to top up an under thrown charge by a grain or two.
As for dies, we think Lee might be just about perfect for us if we are only neck sizing

Badger,

As for dies, we think Lee might be just about perfect for us if we are only neck sizing

Yeah sure but you have to remember that even though you're neck sizing the brass at some point it will have to be full length sized as well. That's when a decent FL die comes into play, I recommend Forster Dies for that job.

Blu

Target master I use one all the time a cracking bit of kit.

tackb,

I just throw my charges and weigh every tenth one to check

Yeah that's what I do for pistol, never had a problem in all the years I've done it.

Blu

Now, any suggestions about powder? We're thinking of Ramshot Magnum, with Viht N560 a possibility too.

meles meles wrote:Now, any suggestions about powder? We're thinking of Ramshot Magnum, with Viht N560 a possibility too.

Which make of bullet and bullet weight are you thinking of using?

Blu

We have some 175 gr Sierra HPBT Matchkings on their way...

meles meles wrote:We have some 175 gr Sierra HPBT Matchkings on their way...

Badger, this is for a 7mm Remington Magnum rifle, is that correct?

Blu

Oh indeedy ! Apparently it loves the 175gr Sierras...