Jumping straight in with a Lapua designated 'Accuracy' load

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
User avatar
Dr. Strangelove
Posts: 363
Joined: Wed Dec 14, 2011 10:46 pm
Location: North Yorkshire
Contact:

Re: Jumping straight in with a Lapua designated 'Accuracy' l

#21 Post by Dr. Strangelove »

Steve E wrote:Reloading data for TR140 can be obtained from commonside@compuserve.com. Just e-mail and ask for the data.
Email sent, cheers!
User avatar
phaedra1106
Posts: 3429
Joined: Wed Feb 08, 2012 9:37 pm
Location: Just outside Sacriston (the nice bit!)
Contact:

Re: Jumping straight in with a Lapua designated 'Accuracy' l

#22 Post by phaedra1106 »

If someone has a copy of this it would be great to see it posted to the forum or hosted on a website where it can be accessed.
There's room for all Gods creatures, next to the mash and gravy :)
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: Jumping straight in with a Lapua designated 'Accuracy' l

#23 Post by ovenpaa »

Hot off the press from that very nice Mikmak.
TR 140 leaflet & data.pdf
(626.05 KiB) Downloaded 123 times
I have some test data and the HSE sheets if anyone would like a copy.

The following note is made: TR140 has similar characteristics to Vihtavuori N140, but is not identical and published loads are not interchangeable.
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
John25

Re: Jumping straight in with a Lapua designated 'Accuracy' l

#24 Post by John25 »

Thanks Dave,

Now I have a small problem (apart from that, silly)

As my only internet access presently is with my Ipad and the second page of the data sheet is upside down, when I turn the pad upside down the data sheet is upside down.

:lol:
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: Jumping straight in with a Lapua designated 'Accuracy' l

#25 Post by ovenpaa »

Hmm... let me see if I can do something about that...
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
John25

Re: Jumping straight in with a Lapua designated 'Accuracy' l

#26 Post by John25 »

Dur!

Ipad - settings - roll lock.

:oops:
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: Jumping straight in with a Lapua designated 'Accuracy' l

#27 Post by ovenpaa »

TR140.JPG
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Jumping straight in with a Lapua designated 'Accuracy' l

#29 Post by Alpha1 »

Thanks for the data sheet interesting but to be honest I think I will stick with N140 or one of the other well known brands of powder there is a lot more data for these powders.

I am still puzzled as to why the dealer would sell this powder to a guy that is new to reloading with out giving him a data sheet for it. In fact I can not understand why he did not advise him to purchase one of the more well known brands to start with. :roll:
Steve E

Re: Jumping straight in with a Lapua designated 'Accuracy' l

#30 Post by Steve E »

Alpha1 wrote:Thanks for the data sheet interesting but to be honest I think I will stick with N140 or one of the other well known brands of powder there is a lot more data for these powders.

I am still puzzled as to why the dealer would sell this powder to a guy that is new to reloading with out giving him a data sheet for it. In fact I can not understand why he did not advise him to purchase one of the more well known brands to start with. :roll:
I've never been given or offered data sheet when buying powder (apart from TR140 from the importer) but then again I'm adult enough to research what I am doing.
As for TR140, all I can say is that it is probably the best value for money powder that you can buy, and the original poster was sold it as it a powder that is as good as N140 (if not better) and a damn sight cheaper. That means more bangs for your bucks.

Steve
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests