New brass prep advice pls

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
Blu

Re: New brass prep advice pls

#21 Post by Blu »

Dromia,
unfortunately for us here in the UK RCBS products are not well promoted or supported by the importers so they are hard to get.
Well mate I'm already here, all you need do is ask, I'm more than happy to get them and send them over if you want. That goes for anything else. Always happy to help a fellow :flag6: . The English and Welsh on the other hand can bugger off. :55: :run:

Blu :twisted:
Top
Post Reply

Return to “Reloading and Ammunition”

Who is online

Users browsing this forum: No registered users and 4 guests