Case volume measurement

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
EagerNoSkill

Re: Case volume measurement

#21 Post by EagerNoSkill »

20series wrote:
christel wrote:
ENS sorry for the humour, this forum is a fantastic resource of knowledge for most things shooting, sadly there are one or two very immature people who frequent it that have to make silly comments :roll: :run: ( I'll get my coat)
Alan
No Problem - I remember now that Ovenpaa in his wisdom spoke about clingwrap over the scale ... but you know my run of luck at the moment PLUS 3 cats! :?
Christel
Site Admin
Posts: 17529
Joined: Fri Nov 05, 2010 7:52 pm
Location: Wind Swept Denmark
Contact:

Re: Case volume measurement

#22 Post by Christel »

ENS....I am pretty sure 20series was referring to me when he said immature :grin:
User avatar
20series
Full-Bore UK Supporter
Posts: 4941
Joined: Mon Nov 08, 2010 10:42 am
Home club or Range: Oundle R&PC
Location: Chelveston, Northants
Contact:

Re: Case volume measurement

#23 Post by 20series »

No i was talking about me and my dubious sense of humour :oops:
A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools!!
Douglas Adams, 1952-2001 RIP
Christel
Site Admin
Posts: 17529
Joined: Fri Nov 05, 2010 7:52 pm
Location: Wind Swept Denmark
Contact:

Re: Case volume measurement

#24 Post by Christel »

Ah right, well that makes even more sense :shakeshout:
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests