Where to begin - if at all !

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: Where to begin - if at all !

#21 Post by ovenpaa »

Put Lee back on the list, the new Lee class classics are very good and have built some cracking rounds for us.
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
User avatar
meles meles
Posts: 6335
Joined: Mon Jun 06, 2011 8:17 pm
Home club or Range: HBSA
Location: Underground
Contact:

Re: Where to begin - if at all !

#22 Post by meles meles »

Cracking rounds ?

You need to anneal the brass more...
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun



Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Gun Pimp

Re: Where to begin - if at all !

#23 Post by Gun Pimp »

Alpha1 wrote:I have been shooting reloading for more years than I care to remember Lee is crap.Crap with a capital C.
Except for the auto prime and the NEW CAST re loading press.
Agreed but I also like those little Lee plastic boxes with a set of all twelve shell-holders - for peanuts! Come to think of it - their universal de-primer die is hand on occasion.

Vince
User avatar
Alpha1
Posts: 8625
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Where to begin - if at all !

#24 Post by Alpha1 »

Agreed but I also like those little Lee plastic boxes with a set of all twelve shell-holders - for peanuts! Come to think of it - their universal de-primer die is hand on occasion.

Vince
Forgot about those yes I would agree they are use full.
User avatar
Polchraine
Posts: 6425
Joined: Sat Nov 06, 2010 11:46 pm
Location: Middlesex
Contact:

Re: Where to begin - if at all !

#25 Post by Polchraine »

Gun Pimp wrote:
Alpha1 wrote:I have been shooting reloading for more years than I care to remember Lee is crap.Crap with a capital C.
Except for the auto prime and the NEW CAST re loading press.
Agreed but I also like those little Lee plastic boxes with a set of all twelve shell-holders - for peanuts! Come to think of it - their universal de-primer die is hand on occasion.

Vince
Vince/GunPimp

Have been trying to get you via PMs - have you seen the message?


"The trouble with quotes on the internet is that it's difficult to discern whether or not they are genuine."
- Abraham Lincoln

Why did kamikaze pilots wear helmets?

God loves stupid people, that is why he made so many of them.
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 6 guests