.223 v 6.5x47mm

Message

#21 Post by **The Gun Pimp** » Wed Nov 25, 2015 6:44 pm

Take ovenpaa's advice and get Forster. Hannam's Reloading are the UK importers.

mullen7 · #22 Post by **mullen7** » Wed Nov 25, 2015 6:56 pm

Yes I've been looking at Forster and they seem to have good prices and good reviews.

#23 Post by **WelshShooter** » Wed Nov 25, 2015 7:19 pm

Third in favour of Forster. I have the full length and seating die, then bought the redding neck sizing die with a 0.288 TiN bushing. I think the forster set was £99 and the redding die was £35. Otherwise you have the redding competition die set which is over £250 which is more than I wanted to pay.

You'll need a shell holder that fits a 308 Winchester case too.

mullen7 · #24 Post by **mullen7** » Wed Nov 25, 2015 7:58 pm

I'll make a shell holder or two, that's no issue! I need to make some .223s for someone and a couple of .38 ones too!

#25 Post by **Alpha1** » Wed Nov 25, 2015 11:54 pm

The Lee shell holders are as cheap as chips.

mullen7 · #26 Post by **mullen7** » Fri Dec 04, 2015 7:57 pm

So the application is in, both 6.5 and .223 applied for, one for mcqueens and sharandon other for f-class. Going for a straight pull for my mcqueens/sharandon rifle!

The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

.223 v 6.5x47mm

Re: .223 v 6.5x47mm

Re: .223 v 6.5x47mm

Re: .223 v 6.5x47mm

Re: .223 v 6.5x47mm

Re: .223 v 6.5x47mm

Re: .223 v 6.5x47mm

Who is online