Page 3 of 8
Re: LMT Accuracy
Posted: Mon Dec 22, 2014 12:02 pm
by TattooedGun
Dannywayoflife wrote:TattooedGun wrote:I can't speak for the rifle you mentioned, but with a 16" barrel, a .308 projectile will go transonic well before it gets to 1000 yards, which would say the long range accuracy would suffer. How much, I have no idea...
Really? I have a 16" barrel on my dta srs covert and easily hit 1000 still supersonic! It depends on your bullet and load dev to push it as fast as you safely can.
Fair enough. I guess I'm still thinking in terms of shooting RG 155gr ammo through a TR rifle at that distance... Everyone lords the 30" barrel as being necessary to keep rounds supersonic out past 1000...
What kind of loads are you using for a 16" barrel that's super out that far...?
Re: LMT Accuracy
Posted: Mon Dec 22, 2014 1:21 pm
by Dannywayoflife
My 175 smk load would scrape 1000 but my main long range load (which I will now redevelop now Davy has altered my mag to allow UBER long loadings :) ) is a 208 Amax at about 2300 fps. This is still supersonic @1000 and with the extra room in the case now I have more mag room I should be able to knock on the door of 2400 fps.
Re: LMT Accuracy
Posted: Mon Dec 22, 2014 1:26 pm
by Dannywayoflife
If I develop a load at 2360 which I've had them going at before when single loading they will be supersonic to 1100 :) just hope I can find an accuracy node around there
Re: LMT Accuracy
Posted: Mon Dec 22, 2014 1:44 pm
by TattooedGun
Dannywayoflife wrote:My 175 smk load would scrape 1000 but my main long range load (which I will now redevelop now Davy has altered my mag to allow UBER long loadings :) ) is a 208 Amax at about 2300 fps. This is still supersonic @1000 and with the extra room in the case now I have more mag room I should be able to knock on the door of 2400 fps.
Intriguing...!
You know when you put in for a variation, and then wish you'd put in for a different calibre... hahaha!
Re: LMT Accuracy
Posted: Mon Dec 22, 2014 2:11 pm
by Dannywayoflife
He he I have a 18" 243 barrel which I am about to start load dev for :) I'm going to use 105 Amax and 115 DTAC's I'm aiming for 2800fps with them both
Re: LMT Accuracy
Posted: Mon Dec 22, 2014 2:56 pm
by joe
The lmt 308 with the side charger as well being accurate (for its intended purpose ) you also rapid fire with it . Unless you feel the need to let rip on occasion I would go for the accuracy international
Re: LMT Accuracy
Posted: Mon Dec 22, 2014 9:29 pm
by DaveB
I am quite 'off' AI, as they charge like a wounded bull.
Dannywayoflife wrote:Most gas guns when run as single shot are generally more accurate mate
I have no reason to doubt you mate - but I have no experience with such things as I live in a country where I can have a semi-automatic rifle.
Re: LMT Accuracy
Posted: Mon Dec 22, 2014 9:42 pm
by Dannywayoflife
DaveB wrote:I am quite 'off' AI, as they charge like a wounded bull.
Dannywayoflife wrote:Most gas guns when run as single shot are generally more accurate mate
I have no reason to doubt you mate - but I have no experience with such things as I live in a country where I can have a semi-automatic rifle.
Jammy sod! Can I come on day release please?
Re: LMT Accuracy
Posted: Mon Dec 22, 2014 9:57 pm
by lapua338
Just buy an AI AT Series and be done with it.
The higher BC's of a 6.5mm .264 calibre will give you an advantage out to 1200 yards over 7.62/.308 unless you're going to be shooting 210-220gr HPBT Matchking's or similar. Specialised Berger Hybrids (30 cal) are available which offer increased performance but are more costly.
Re: LMT Accuracy
Posted: Mon Dec 22, 2014 10:00 pm
by HALODIN
I bought my AI-AT .260 with 26" barrel off the shelf, it was delivered to my local RFD in 2 days...
