Case life, and sundry matters appertaining to performance:

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
User avatar
meles meles
Posts: 6335
Joined: Mon Jun 06, 2011 8:17 pm
Home club or Range: HBSA
Location: Underground
Contact:

Re: Case life, and sundry matters appertaining to performanc

#21 Post by meles meles »

So many questions...
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun



Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Maggot

Re: Case life, and sundry matters appertaining to performanc

#22 Post by Maggot »

meles meles wrote:So many questions...
That's what makes reloading (and ammunition/ballistics in general) such a fascinating subject oh humbug like one.

What gets me is the tiny things that make huge differences (both in terms of performance and safety).

It is probably too late for me now, but although I studied gunnery science (very limited it has to be said) in the mob, I would love to study ballistics.

I am also basically lazy and don't like changing anything that is not essential (or requires too much monitoring) or is unlikely to achieve much.

Which is why I wonder about the shift of brass on a case where it has been neck turned....how long will it stay concentric?

Good stuff, pity I cannot answer any of it :squirrel:
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests