Ogive to base measurements.
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Ogive to base measurements.
Nice try :lol: :lol:
Re: Ogive to base measurements.
Ok lets say I was to have a go at 1000yds with this rifle I normally use
155g A max bullets with 42.3grains of N140.
What would you suggest to get out to 1000yds.
155g A max bullets with 42.3grains of N140.
What would you suggest to get out to 1000yds.
Re: Ogive to base measurements.
I shoot Lapua 155 Scenar's with 47.5 grains of N540 in a 1:12 barrel which works well at 1000 and keeps me nicely on a small frame at 1200. You would need to work up to the 47.5 however it works for me and some are pushing 155's a lot faster than I do.
Re: Ogive to base measurements.
... and some much slower.ovenpaa wrote:and some are pushing 155's a lot faster than I do.
You can also get ample velocity for 155's at 1000x with N140 (thereby avoiding the barrel-burning double-base powders). There are popular (and successful) commercial loads using circa 46.0gr N140 behind a Sierra 2155; my own long range loads use up to 1.0gr less than this (also with a Sierra 2155). Usual safety disclaimers apply. Work up carefully.
..
Re: Ogive to base measurements.
Interesting. :shock:
Who is online
Users browsing this forum: Bing [Bot] and 4 guests