Interesting stuff on the possible powder shortages but could we get back on the original question of n140 308 loads on this thread please
sign92
N140 308 load advice
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Mr_Logic
Re: N140 308 load advice
Tbh I think it's done, 46-ish grains and work up in your gun. If you need more speed, N540 should deliver
But yes, OK :)
But yes, OK :)
-
Dougan
Re: N140 308 load advice
I'm possibly not the best person for reloading advice, but I do shoot .308 to 1000 yards (TR) - As far as I know the RUAG (which uses the 155 SMK) ammo I'm using is doing about 2980 fps - through my 28" barrel (about halfway through it's useful life) it is superb between 200 and 900 yards, but opens up at 1000...possibly due to leaving super-sonic...
...from speaking to other TR shooters, it appears that N140 is quite popular, but the loads necessary to stay super-sonic at 1000 are quite strong.
I don't know much about Remys...is it a strong action, and how long is the barrel?
...from speaking to other TR shooters, it appears that N140 is quite popular, but the loads necessary to stay super-sonic at 1000 are quite strong.
I don't know much about Remys...is it a strong action, and how long is the barrel?
-
Matt
Re: N140 308 load advice
The remy action isn't as strong as custom variants but it is still ok according to those in the know to get out to 1000 with suitable loads. (Although I won't be able to get close to some of the speeds that are being reported from a 308 from some of the guys in FTR that are getting to the limits). Still, speed isn't everything (although like money it helps smile2 ) and I'm hoping that good shooting still goes a fair way to not embarrassing myself when I enter my first comp 
I'll measure my barrel length later (new Lilja around 29 inches) but have a quick related question..... When barrel length is quoted where is the measurement actually taken from.... The easiest measurement is from the end of the action but the actual overall length will surely depend on the amount of length still in the action which is harder to measure or is it taken from the lands?
Also whilst on the subject - with a 155 2156 or 155.5 Berger what velocity should I be aiming for to keep me still accurately supersonic at 1000?
sign92
I'll measure my barrel length later (new Lilja around 29 inches) but have a quick related question..... When barrel length is quoted where is the measurement actually taken from.... The easiest measurement is from the end of the action but the actual overall length will surely depend on the amount of length still in the action which is harder to measure or is it taken from the lands?
Also whilst on the subject - with a 155 2156 or 155.5 Berger what velocity should I be aiming for to keep me still accurately supersonic at 1000?
sign92
Re: N140 308 load advice
A bullet will travel around 27.5" in a 29" barrel. You need to be at an absolute minimum of 2850fps with the #2156 for 1000 yards and ideally closer to 2900fps as a start point this is around 45.5 grains of TR140 however MV is dependant on many factors. Right now Lilja barrels have a reputation for running quick so I would say start a lot lower and work up over a chrono.
Who is online
Users browsing this forum: Google [Bot] and 6 guests