Page 11 of 17
Re: SGC 9mm Lever release - something black continued
Posted: Fri Jan 13, 2012 7:27 pm
by Blackstuff
Ok so the allen key for the lever screw is 2.5mm and the one for the pin/bar is 2mm
Here's the allen slot on the bar/pin:
Comparison of levers:
The CAA grip i fitted;
And yes it needs a bloody good clean!

:lol:
Re: SGC 9mm Lever release - something black continued
Posted: Fri Jan 13, 2012 9:28 pm
by Cj10
Mark, thanks for this. It really helps.
Did you find the updated lever on SGC's website or did you have to ring Bob/ Dave to order it? if I have to ring, I'll get my girlfriend to do it as, I suspect, Bob will put the phone down on me! We had a bit of a falling out over the section 5 9mm fiasco.
Thanks again
Ceri
Re: SGC 9mm Lever release - something black continued
Posted: Sat Jan 14, 2012 9:59 am
by Blackstuff
I ordered mine over the phone but i didn't think to check to see if i could have ordered online. I actually had to phone back up a week later to chase it up and he'd lost the order and i had to place it again :roll:
Re: SGC 9mm Lever release - something black continued
Posted: Mon Jan 30, 2012 8:35 pm
by Dangermouse
I am keeping this thread running as I want anyone who searches the Internet for
SGC 9mm lever release to find this thread and hopefully any questions they have will be answered etc
Returning to the question of sourcing Magazines.
It has been confirmed already that the American company ICJ sell a variety of 9mm AR specific magazines at under $20 each, which work in our lever actions.
http://shop.lcjwholesalestore.com/32-Ro ... nd-9mm.htm
Unfortunately at the moment they are charging a humongous amount for P&P which makes a $100 order become over $300.
Personally I would settle for 10 round magazines, as after all this is a gallery rifle gun for me and the courses of fire are 6 rounds each. But you do need at least 6 magazines for some of the courses of fire.
Has anyone purchased any magazines recently that have been a good price? under £20 each would be great but I can not find any US dealer who will ship to the UK,
DM
Re: SGC 9mm Lever release - something black continued
Posted: Mon Jan 30, 2012 9:07 pm
by Sandgroper
Not quite under £20 but fixed postage and no customs duty.
http://www.midwayuk.com/apps/eproductpa ... mid=493432
or try some the militaria stores if you fancy some diy to a uzi mag
http://www.dandbmilitaria.com/uzi-32-ro ... 7313-p.asp
Re: SGC 9mm Lever release - something black continued
Posted: Mon Jan 30, 2012 10:17 pm
by EagerNoSkill
Ok what is the history of SCG and S1 guns :roll:
Re: SGC 9mm Lever release - something black continued
Posted: Tue Jan 31, 2012 1:27 pm
by Blackstuff
Dangermouse wrote:
Personally I would settle for 10 round magazines, as after all this is a gallery rifle gun for me and the courses of fire are 6 rounds each. But you do need at least 6 magazines for some of the courses of fire.
DM
:G SGC LRA9's are automatically put into Open division where the is no magazine capacity restriction?? I'm doing IPSC competitions though so that might be different
Re: SGC 9mm Lever release - something black continued
Posted: Tue Jan 31, 2012 6:50 pm
by John MH
Who runs non Practical Shotgun IPSC competitions in the UK?
Re: SGC 9mm Lever release - something black continued
Posted: Wed Feb 01, 2012 1:53 pm
by Blackstuff
John MH wrote:Who runs non Practical Shotgun IPSC competitions in the UK?
Most are just local clubs running them for themselves, but
http://four4islands.org/ are a break away group running 'full-fat' competitions but not affiliated with UKPSA/IPSC

A bit far saaarrrff for me though
Re: SGC 9mm Lever release - something black continued
Posted: Fri Feb 03, 2012 4:23 pm
by Dangermouse
I had a reply from Midway UK today re the 10 round 9mm AR mags that Sandgroper gave a link to. They do not know if they will work in this system - Sandgroper, have you used any of these or were you just being helpful in pointing them out?
DM