Page 2 of 2
Re: .357 loading advise
Posted: Sun Jul 01, 2012 2:19 pm
by Mike357
I use Vecan AS from Peter Lawman, similar price to GM3. Several friends use both also and we are shooting 298 and above all day long. Same goes for unique.
As Dromia said, it's all about what works for you.
Re: .357 loading advise
Posted: Sun Jul 01, 2012 3:48 pm
by mr smith
Mike357 wrote:I use Vecan AS from Peter Lawman
Talking of which Mike are you wanting any just now or are okay for the noo.
Re: .357 loading advise
Posted: Sun Jul 01, 2012 4:33 pm
by Mike357
I'll take a tub to top up my stock. Cheers.
Re: .357 loading advise
Posted: Sun Jul 01, 2012 5:33 pm
by dodgyrog
http://modomirino.blogspot.co.uk/2009/1 ... t-gm3.html
This would be a starting point if I were to use it by comparing shotshell loads with their equivalents in Alliant (or other) powders.
I put this on ref GM3 powder - the wrong thread I believe, so sorry for that.
Re: .357 loading advise
Posted: Sun Jul 01, 2012 5:58 pm
by Tidyonafriday
Hi Mike357,
What does it cost you to have powders delivered from Peter lawman for the Vecan powders ?
Would like to give this a go.
Cheers everyone for the replies.
:goodjob:
Re: .357 loading advise
Posted: Sun Jul 01, 2012 6:27 pm
by mr smith
Tidyonafriday wrote:Hi Mike357,
What does it cost you to have powders delivered from Peter lawman for the Vecan powders ?
Would like to give this a go.
Cheers everyone for the replies.
:goodjob:
From memory from about two years ago it was about £17 for a good amount,not all was the easiest guy to get a hold of.One of the guys from my club has just ordered powder from him and he didn't have any AS left.
Re: .357 loading advise
Posted: Sun Jul 01, 2012 6:47 pm
by phaedra1106
He has GM3, my friend's just rang to say he's picked up my order for me and is on the way home so I'll try and get out of the house tomorrow and go pick it up then try some .44s, starting load will be 200g plated bullet over 5.4gr, same powder weight as I use with TiteGroup but at less than half the cost!.