Part name required - help please
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Dangermouse
Re: Part name required - help please
Spud,
It apeears to be No 19, but I will also be ordering one for .223 (No4) and fancy getting some spare breech lock quick change bushings x 6
http://leeprecision.com/breech-lock-qui ... hings.html
Do you have all that?
DM
It apeears to be No 19, but I will also be ordering one for .223 (No4) and fancy getting some spare breech lock quick change bushings x 6
http://leeprecision.com/breech-lock-qui ... hings.html
Do you have all that?
DM
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Part name required - help please
If Spud can't help I recommend Titan (see link in other post), phone Henry Kranks looking for a 9mm shell plate for the Load Master, non in stock, non expected until June!!, ordered it with Titan and sent the same day, fastest I've had was 5 days from shipping to arriving!. I always use them for any Lee stuff I need if I'm going over to the US and they also ship to the UK at sensible prices unlike Sinclair/Brownells!.
There's room for all Gods creatures, next to the mash and gravy :)
-
saddler
Re: Part name required - help please
Lee do a set of about 12 of the most common shell-holders in a nice plastic box
Bought one years back & never lost one since!!
Bought one years back & never lost one since!!
Who is online
Users browsing this forum: No registered users and 5 guests