Case Trimmer

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
User avatar
20series
Full-Bore UK Supporter
Posts: 4941
Joined: Mon Nov 08, 2010 10:42 am
Home club or Range: Oundle R&PC
Location: Chelveston, Northants
Contact:
Contact 20series

Re: Case Trimmer

#11 Post by 20series »

ooh I likey muchly :goodjob: :cheers:

I feel a new project coming on :D

My new man cave is on hold until the shares pick up a bit :bad:

Alan
A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools!!
Douglas Adams, 1952-2001 RIP
Top
User avatar
pe4king
Posts: 1402
Joined: Sat Nov 06, 2010 9:59 pm
Home club or Range: Lydd Rifle Club.
Location: Rainham, Kent.
Contact:
Contact pe4king

Re: Case Trimmer

#12 Post by pe4king »

Just checked my wire wool its actually 000 grade very fine, any residue can be picked up with a magnet
I have also checked case lenghts tonight for consistancy they are within+/- .0015 good enough for me
What is a Sapper? This versatile genius condenses the whole system of military engineering and all that is useful and practical. He is a man of all work of the Army and the public ready to do anything or go anywhere, in short, he is a Sapper.
Top
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:
Contact ovenpaa

Re: Case Trimmer

#13 Post by ovenpaa »

Thou and a half is not bad at all. I try to avoid wire wool as I always end up getting it in my fingers like little splinters.
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
Top
Dougan

Re: Case Trimmer

#14 Post by Dougan »

Thanks for clarifying that Pe4king - To be honest I'll try the scourer first (already have some), as I don't like the sound of little spliters of wire everywhere....

What I need to work out now though, along I'm sure with others who have read this thread - is where and how to mount the drill.... :good:
Top
User avatar
pe4king
Posts: 1402
Joined: Sat Nov 06, 2010 9:59 pm
Home club or Range: Lydd Rifle Club.
Location: Rainham, Kent.
Contact:
Contact pe4king

Re: Case Trimmer

#15 Post by pe4king »

Mounting thats what got me then I thought next to the board I have my press fixed to, it creates a 50mm step so the first thing that came to mind was the drywall stud brackets (I have a surplus :shifty: ) I then made everything else from them also , foot pedal and bracket, but thats only temporary untill it breaks which could be ages the way its working out :good:
What is a Sapper? This versatile genius condenses the whole system of military engineering and all that is useful and practical. He is a man of all work of the Army and the public ready to do anything or go anywhere, in short, he is a Sapper.
Top
Post Reply

Return to “Reloading and Ammunition”

Who is online

Users browsing this forum: No registered users and 4 guests