Hopefully, I won't have to worry about factory ammo for much longer. I've assembled virtually all my loading kit now. I'm just waiting for some Redding neck bushes to arrive. I've got 100 Lapua Palma cases, a batch of Berger 155.5 bullets and also a load of Sierra bullets to try in my GGG once-fired brass...which is all de-crimped, de-primed, cleaned and primer-pocket re-formed.
Oh, got a tub each of RS50 and RS52 as well
Differences between GGG ammunition?
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Who is online
Users browsing this forum: No registered users and 5 guests