Mine are the opposite.......in both my Mosins and SVD the PPU factory ammo is worse than milsurp accuracy-wise.......but reloading using their 150gr .311" SPBT bullets give very good results, less than 1 MOA in the SVD.It could be that mine don't like heavier bullets, especially true with the SVD as the 1:320mm twist favours a 150gr bullet, as the PPU factory 54r rounds are 174gr if I remember right.lasbrisas wrote:I use them in 4 of my rifles, SMLE, No5, Mosin Nagant and Arisaka Type 99 and they all shoot well enough.
ppu
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
snayperskaya
- Posts: 7234
- Joined: Fri Oct 04, 2013 6:43 pm
- Home club or Range: West Bank of the Volga.....
- Location: West of The Urals
- Contact:
Re: ppu
"The only real power comes out of a long rifle." - Joseph Stalin
Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.
More than a vested interest in 7.62x54r!
Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.
More than a vested interest in 7.62x54r!
-
lasbrisas
Re: ppu
oh yes I hate ppu factory ammo but the bullets are ok for reloading, I haven't had any issues and they are accurate enough for my needs. I use the 174gr in all of mine, it keeps it simple and I also use N140 in most rifles.snayperskaya wrote:Mine are the opposite.......in both my Mosins and SVD the PPU factory ammo is worse than milsurp accuracy-wise.......but reloading using their 150gr .311" SPBT bullets give very good results, less than 1 MOA in the SVD.It could be that mine don't like heavier bullets, especially true with the SVD as the 1:320mm twist favours a 150gr bullet, as the PPU factory 54r rounds are 174gr if I remember right.lasbrisas wrote:I use them in 4 of my rifles, SMLE, No5, Mosin Nagant and Arisaka Type 99 and they all shoot well enough.
Who is online
Users browsing this forum: Bing [Bot] and 7 guests