SMK #2155 build length

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
rox
Posts: 1900
Joined: Fri Dec 10, 2010 1:33 pm
Contact:

Re: SMK #2155 build length

#11 Post by rox »

Ovenpaa wrote:Just checked these, they average out at 1.1290" in length and weigh 158.60 to 158.75 grains
Just measured a few and got
length 1.138"
ogive 0.548" to 0.560"
weight 155 +/- 0.1

Ovenpaa wrote:Rox, those 190's have long since been shot
I thought they had!
User avatar
TattooedGun
Posts: 2517
Joined: Mon Jul 11, 2011 11:55 am
Home club or Range: Dudley Rifle Club, UKPSA, Bromsgrove
Location: West Midlands
Contact:

Re: SMK #2155 build length

#12 Post by TattooedGun »

#2156 build length to 0.020" off the lands in my RPA are 2.875" long
#2155 old lengh (i moved on to #2156 5 years ago) were built 0.020" off the lands in the same chamber at 2.800"

HTH
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests