Page 2 of 8
Re: just had to
Posted: Thu Aug 17, 2017 6:40 pm
by bhodge
Don't worry too much about the magazine, it's not meant to be removed too often. Just strip it, give it a bit of a clean (the mag & the action), and reassemble it. Should be fine.
Re: just had to
Posted: Fri Aug 18, 2017 6:16 am
by ballkeeper
bhodge wrote:Don't worry too much about the magazine, it's not meant to be removed too often. Just strip it, give it a bit of a clean (the mag & the action), and reassemble it. Should be fine.
its press that lever so it drops the mag out out thats a bit of a pain, or i am not pressing it enough[wimp
]
Re: just had to
Posted: Fri Aug 18, 2017 6:30 am
by bnz41
It's not like a AR press the button and mags drops you need to pull down on the mag as well as push in the lever.
Re: just had to
Posted: Fri Aug 18, 2017 6:44 am
by bhodge
I thought this might be interesting (if the link works)...
http://www.euroarms.net/EFD/introduction.htm
Re: just had to
Posted: Fri Aug 18, 2017 7:18 am
by ballkeeper
bnz41 wrote:It's not like a AR press the button and mags drops you need to pull down on the mag as well as push in the lever.
ill give that a go,
Re: just had to
Posted: Fri Aug 18, 2017 7:21 am
by ballkeeper
link works , yes looks interesting
Re: just had to
Posted: Sun Aug 20, 2017 1:27 pm
by ballkeeper
first shoot at 100m 12 rounds errrrrr
Re: just had to
Posted: Sun Aug 20, 2017 1:53 pm
by Duey
Did you bother putting any powder in the cases, or just use the primers
Re: just had to
Posted: Sun Aug 20, 2017 1:57 pm
by ballkeeper
ppu 174gr factory ammo
Re: just had to
Posted: Sun Aug 20, 2017 2:25 pm
by Dark Skies
Did you throw those bullets up range with a catapult? :)
Missing the target is fine off the bat but those bullets are tumbling.
How does it shoot with other ammo?
What does the bore look like?