Unfortunately QL3.9 does not list this bullet.clayduster wrote:Thanks ovenpaa
Lapua do one
4 PL/HL 6000
Has anyone used TR140 or RS50 for 6.5 Creedmoor?
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Has anyone used TR140 or RS50 for 6.5 Creedmoor?
-
dromia
- Site Admin
- Posts: 20228
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Has anyone used TR140 or RS50 for 6.5 Creedmoor?
clayduster wrote:Sim G wrote:In that case, you're at risk as is anyone who shoots around you.
No need to thank me, I don't support your ethos or practice.
Far safer than being on a computer when you are
Safety advice should never be taken flippantly, even if you choose not to take it.
Safety is everyone's concern and safety advice is to be encouraged.
I would suggest that you consider that there may be a good reason there is no data for the load you seek, the obvious being it is not a good/safe combination.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
clayduster
Re: Has anyone used TR140 or RS50 for 6.5 Creedmoor?
dromia wrote:clayduster wrote:Sim G wrote:In that case, you're at risk as is anyone who shoots around you.
No need to thank me, I don't support your ethos or practice.
Far safer than being on a computer when you are
Safety advice should never be taken flippantly, even if you choose not to take it.
Safety is everyone's concern and safety advice is to be encouraged.
I would suggest that you consider that there may be a good reason there is no data for the load you seek, the obvious being it is not a good/safe combination.
Nearly there thank you,
the answer to my question as clarified by Ovenpaa, Phedra 1106, Welsh shooter and Dromia seems to match your assumption.
I did not ask for advice I asked a question
Feel free to reply i'm too busy.
-
dromia
- Site Admin
- Posts: 20228
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Has anyone used TR140 or RS50 for 6.5 Creedmoor?
Your irresponsible attitude merits the locking of this thread!
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Who is online
Users browsing this forum: No registered users and 5 guests