Yes - do you know you can buy just the Micrometer? - About $25US posted to the UK - straight forward replacement.ovenpaa wrote:Those of you that use Redding, do you use the Micrometer type competition bullet seating die?
Mike
POLL - what make of bullet seater do you use?
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
M99
Re: POLL - what make of bullet seater do you use?
Mike
-
Watcher
Re: POLL - what make of bullet seater do you use?
Yes; for my .308.ovenpaa wrote:Those of you that use Redding, do you use the Micrometer type competition bullet seating die?
-
dromia
- Site Admin
- Posts: 20224
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: POLL - what make of bullet seater do you use?
I use Forster and Lyman Micrometer seating dies as well as the Hornady seating dies which don't have micrometer adjust but do use a bullet aligning sleeve for minimal run out.
For cast boolits which are usually oversize for the calibre and therefore don't work well (fit) these condom designed seaters I like to use the Vickerman style in line seaters as you can have these made to suit your boolit diameter.
For cast boolits which are usually oversize for the calibre and therefore don't work well (fit) these condom designed seaters I like to use the Vickerman style in line seaters as you can have these made to suit your boolit diameter.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
Oddbod
Re: POLL - what make of bullet seater do you use?
Lee for rifle & RCBS for cast handgun bullets.
Re: POLL - what make of bullet seater do you use?
I use Redding dies with the additional "add on" micrometer seating stem. - At £29 from Reloading solutions I thought these were a good buy.
Who is online
Users browsing this forum: No registered users and 6 guests