Yes!!! I had a one of these, bugger to get the caps to stay in but they did work.
You needed a slightly dried out spud, stopped the water leeching into the primer pocket ("") and the rubbery potato made a better gas seal.
Unearthed some rarities..??
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
safetyfirst
- Posts: 2651
- Joined: Tue Nov 25, 2014 8:41 am
- Contact:
-
Maggot
Re: Unearthed some rarities..??
One for quickload perhaps clapclapsafetyfirst wrote:Yes!!! I had a one of these, bugger to get the caps to stay in but they did work.
You needed a slightly dried out spud, stopped the water leeching into the primer pocket ("") and the rubbery potato made a better gas seal.
Who is online
Users browsing this forum: No registered users and 6 guests