Sorry about quality...taken before I got the macro.
Mike357...remind me what you are putting the 357mag reloads thru???
I'm a reloader
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Robin128
Re: I'm a reloader
You gotta see this...will someone pass the sick bucket to Sim G please... :lol: :lol:
Sorry about quality...taken before I got the macro.
Mike357...remind me what you are putting the 357mag reloads thru???
Sorry about quality...taken before I got the macro.
Mike357...remind me what you are putting the 357mag reloads thru???
-
Christel
- Site Admin
- Posts: 17527
- Joined: Fri Nov 05, 2010 7:52 pm
- Location: Wind Swept Denmark
- Contact:
Re: I'm a reloader
Well done Mike357,
Pretty soon the reloading will take on a life of it's own, if it has not already.
As others on here have said before it becomes a hobby that you very likely will spend more money and time on than the actual shooting.
It is worth it.
Pretty soon the reloading will take on a life of it's own, if it has not already.
As others on here have said before it becomes a hobby that you very likely will spend more money and time on than the actual shooting.
It is worth it.
-
dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: I'm a reloader
24 inch Octagonal is fine. Well balanced.
I have a low power scope on mine coz the eyes ain't wot they used ter be.
I have a low power scope on mine coz the eyes ain't wot they used ter be.
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
Re: I'm a reloader
Well done on the reloading Mike, it is strangely satisfying to look at a couple of full load trays you have built yourself. Can you post up a couple of pictures of your loading system?
-
Mike357
- Posts: 3637
- Joined: Sat Dec 04, 2010 7:25 pm
- Home club or Range: NRA, Bisley, Dundee Rifle & Pistol Club & Bishop Auckland GC
- Location: Near Durham(ish)!
- Contact:
Re: I'm a reloader
Currently using a Winchester 94AE which is not bad but very tempremental when feeding rounds. Distances are currently 25yds but comps may move to 50yds at some clubs. Also want to try full mag loads at 100yds too for a laff!Robin128 wrote:You gotta see this...will someone pass the sick bucket to Sim G please... :lol: :lol:
Sorry about quality...taken before I got the macro.
Mike357...remind me what you are putting the 357mag reloads thru???
I've hijacked a friends reloading set up for now and he has very kindly given me a key for his garage. I will set my gear up firstly on a temp basis in the kitchen and then in my office when I replace the desk with 5m of beech block worktop. Cant decide whether to go for std height or higher "draughtsman" style!
It's not the pace of life that concerns me, it's the sudden stop at the end!
Re: I'm a reloader
Decide if you are going to sit or stand and then build accordingly. I am quite tall so my benching is quite high and designed for me to work at from a stool however I find myself standing for a lot of the work.
Who is online
Users browsing this forum: No registered users and 10 guests