Without wishing to confuse the OP where do you get load data for TR140?
Do you just use N140 starting loads & work up or do they publish their own data?
Which powder
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Which powder
The TR140 loads are fairly well documented and I have it on Quickload if you get stuck Stuck, geddit... :lol:
Re: Which powder
What rifle are you going to shoot these loads in?pockets99 wrote:Thanks for all the responses folks, recon I'm gonna try some TR140 as that seems to be the consensus, needed to post a few more times before I'm trusted to retrieve PMs :-)
What club do you shoot with?
Which ranges do you use?
Answers in separate posts please!
.
-
Stuck
Re: Which powder
ovenpaa wrote:The TR140 loads are fairly well documented and I have it on Quickload if you get stuck Stuck, geddit... :lol:
Aye,
That's why I'm called Stuck
Didn't realise TR140 was included on Quickload, where would I find that powder listed? (i.e. N140 is obviously in the Viht file)
-
pockets99
Re: Which powder
Rifle is an AT308, picked it up last month, only managed to get out on the range once, 300/500/600 yards last week!
-
pockets99
Re: Which powder
I've only ever shot rifle at Bisley (I'm only 20 mins away) but have shot pistol at Coppens shootingsport in Knokke-Heist Belgium a few times. Really must go back, the Mrs loves the chocolate!
-
kennyc
- Posts: 2340
- Joined: Wed Jul 20, 2011 11:21 pm
- Home club or Range: hunters NRPC
- Location: Reading West Berks
- Contact:
Re: Which powder
as you already go to Bisley, just pick up the powder and load tables from the importer, he lives on the camp.pockets99 wrote:I've only ever shot rifle at Bisley (I'm only 20 mins away) but have shot pistol at Coppens shootingsport in Knokke-Heist Belgium a few times. Really must go back, the Mrs loves the chocolate!
Re: Which powder
I have never had any luck finding re loading data for T140 or finding any body that sells it in my neck of the woods.
-
kennyc
- Posts: 2340
- Joined: Wed Jul 20, 2011 11:21 pm
- Home club or Range: hunters NRPC
- Location: Reading West Berks
- Contact:
Re: Which powder
N140 loads are a good starting point, the guy who imports it is Nigel you can get him on commonside(at)compuserve.com he is very helpful and can normally email you tablesAlpha1 wrote:I have never had any luck finding re loading data for T140 or finding any body that sells it in my neck of the woods.
Re: Which powder
Unfortunately I have never been able to find any body in the Area who sells T140.Alpha1 wrote:
I have never had any luck finding re loading data for T140 or finding any body that sells it in my neck of the woods.
N140 loads are a good starting point, the guy who imports it is Nigel you can get him on commonside(at)compuserve.com he is very helpful and can normally email you tables
Who is online
Users browsing this forum: No registered users and 4 guests