The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

i did think about drilling out the base to remove the majority of the brass then trying a hammer and screwdriver to mangle the rest out

No don't do that. Leave the die in your press screw the lock nut and de capper re sizing rod out of the die. find a short piece of metal rod that will go through your case mouth spray the whole thing with WD40 then knock it out with the rod and a hammer does not matter if you wreck the case saving the die is the important thing.
I don't know how you can get a 7.62x39 case stuck any way. Can you post some pictures.

Bloody echo in here!

like i said it must be stuck where the neck step is being pushed down to one

Jackmanuk, we are in Mid Beds, drop in if you are passing and I will see if I can pull it out for you.

ovenpaa wrote:...drop in if you are passing and I will see if I can pull it out for you.

wtfwtf
Now THERE'S an offer ya cannot refuse!