PRIMERS

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
User avatar
mag41uk
Posts: 1847
Joined: Sat Oct 13, 2012 3:50 pm
Home club or Range: Aldershot R & P Club
Location: Reading
Contact:
Contact mag41uk

Re: PRIMERS

#11 Post by mag41uk »

The primers I am after are Federal 210M the match large rifle.
I have masses of standard primers!
Hannams did have standard primers not the match ones!
Top
User avatar
Graham M
Full-Bore UK Supporter
Posts: 1010
Joined: Sun Nov 07, 2010 1:14 pm
Location: Brum
Contact:
Contact Graham M

Re: PRIMERS

#12 Post by Graham M »

Graham M wrote:Just found 1000 PPU primers at a shop off the M6.
Anyone use them?


G.M. sign85


any????
Never argue with an idiot, he will drag you down to his level and beat you with experience.
Top
User avatar
kennyc
Posts: 2340
Joined: Wed Jul 20, 2011 11:21 pm
Home club or Range: hunters NRPC
Location: Reading West Berks
Contact:
Contact kennyc

Re: PRIMERS

#13 Post by kennyc »

Graham M wrote:
Graham M wrote:Just found 1000 PPU primers at a shop off the M6.
Anyone use them?


G.M. sign85


any????
in PPU ammo they work fine :good: can't see why they wouldn't be OK I'm using S&B myself
Top
Doz

Re: PRIMERS

#14 Post by Doz »

Graham M wrote:
Graham M wrote:Just found 1000 PPU primers at a shop off the M6.
Anyone use them?


G.M. sign85


any????
I use them, never had one fail to go bang either...
Top
User avatar
Graham M
Full-Bore UK Supporter
Posts: 1010
Joined: Sun Nov 07, 2010 1:14 pm
Location: Brum
Contact:
Contact Graham M

Re: PRIMERS

#15 Post by Graham M »

Yes I have used PPU ammo myself, it's just that I have heard that the primers themselves can be a little bit oversized and difficult to seat.
G.M.
Never argue with an idiot, he will drag you down to his level and beat you with experience.
Top
Doz

Re: PRIMERS

#16 Post by Doz »

Graham M wrote:Yes I have used PPU ammo myself, it's just that I have heard that the primers themselves can be a little bit oversized and difficult to seat.
G.M.
I have to say I've never noticed that Graham, I've used them in a mixture of Lapua, HXP and PRVI brass and never yet had any issues.
Top
User avatar
Graham M
Full-Bore UK Supporter
Posts: 1010
Joined: Sun Nov 07, 2010 1:14 pm
Location: Brum
Contact:
Contact Graham M

Re: PRIMERS

#17 Post by Graham M »

OK cheers :goodjob:

G.M.
Never argue with an idiot, he will drag you down to his level and beat you with experience.
Top
Post Reply

Return to “Reloading and Ammunition”

Who is online

Users browsing this forum: No registered users and 5 guests