Spare Scale Pan for Reloading Scales

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
edchef

Spare Scale Pan for Reloading Scales

#1 Post by edchef »

Can anyone tell me where I can obtain a scale pan for my Ohaus reloading scales which are currently on their way from the US
I assume that the designs are all similar and that most could be adapted to fit another make
Any help/advice appreciated
Thanks
Ed
Top
User avatar
dodgyrog
Posts: 4103
Joined: Wed Jan 05, 2011 11:17 pm
Home club or Range: Three Counties Sporting Club & Gardners Guns
Location: Consett, County Durham
Contact:
Contact dodgyrog

Re: Spare Scale Pan for Reloading Scales

#2 Post by dodgyrog »

Try emailing RCBS directly as they have an excellent after sales service.
Otherwise GMK but good luck with them!!!
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
Top
John25

Re: Spare Scale Pan for Reloading Scales

#3 Post by John25 »

Here's one.

http://www.ebay.co.uk/itm/350572881256

I bought one of these from Siclairs, but they list them as out of stock at the moment.

HTH

J
Top
rox
Posts: 1900
Joined: Fri Dec 10, 2010 1:33 pm
Contact:
Contact rox

Re: Spare Scale Pan for Reloading Scales

#4 Post by rox »

John25 wrote:Here's one.

http://www.ebay.co.uk/itm/350572881256

I bought one of these from Siclairs, but they list them as out of stock at the moment.

I've got a couple of the RCBS equivalent pan/funnels that are surplus to requirements at the moment (new & unused):

Image


If you want the pan for an RCBS beam balance (Ohaus may be the same) then the following might be what you're looking for:

Part number: 9078 SCALE PAN 505 510 1010 $20.95


..
Top
1066
Full-Bore UK Supporter
Posts: 2254
Joined: Wed Aug 31, 2011 7:05 pm
Contact:
Contact 1066

Re: Spare Scale Pan for Reloading Scales

#5 Post by 1066 »

edchef wrote:Can anyone tell me where I can obtain a scale pan for my Ohaus reloading scales which are currently on their way from the US
I assume that the designs are all similar and that most could be adapted to fit another make
Any help/advice appreciated
Thanks
Ed
If you have some beam scales on the way you will have to adjust the tare weight when you get the new pan, even if it's an exact replacement it's unusual to be exactly the same weight. If it's a digital no problem.
You can see about half way through this video how I do it.
http://www.youtube.com/watch?v=HOKJxe0FUTk
TARGETMASTER
an altogether better trickler
www.targetmasteruk.com
Top
Post Reply

Return to “Reloading and Ammunition”

Who is online

Users browsing this forum: No registered users and 10 guests