Silent and slippery: subsonic handloads...
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
- meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Silent and slippery: subsonic handloads...
oomans,
We're contemplating commissioning a moderated rifle, basically an update of the De Lisle concept but with out the constraint of having to use existing service ammunition. The rifle will be shot at a range of 300 yards, hence another good reason for abandoning the .45ACP. What would you recommend as a calibre and bullet? The bullet will ideally have a high sectional density and good aerodynamics so as to retain downrange energy when loaded to subsonic levels. Perhaps something like .338 in a necked out 7.62x39 case ?
We're contemplating commissioning a moderated rifle, basically an update of the De Lisle concept but with out the constraint of having to use existing service ammunition. The rifle will be shot at a range of 300 yards, hence another good reason for abandoning the .45ACP. What would you recommend as a calibre and bullet? The bullet will ideally have a high sectional density and good aerodynamics so as to retain downrange energy when loaded to subsonic levels. Perhaps something like .338 in a necked out 7.62x39 case ?
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
- kennyc
- Posts: 2340
- Joined: Wed Jul 20, 2011 11:21 pm
- Home club or Range: hunters NRPC
- Location: Reading West Berks
- Contact:
Re: Silent and slippery: subsonic handloads...
300 Blackout, or Whisper?
Re: Silent and slippery: subsonic handloads...
Already exists in the .300 Whisper. ACC came out with their version also, the .300 Blackout.
The Whisper has been out for a while and dies, cases and the likes freely available over t'interweb. Loads of data as well. Bullets straight from an average dealers shelves.
Edit: Same time post as Kenny!
The Whisper has been out for a while and dies, cases and the likes freely available over t'interweb. Loads of data as well. Bullets straight from an average dealers shelves.
Edit: Same time post as Kenny!
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
Re: Silent and slippery: subsonic handloads...
Funnily enough I read on the Savage site that after advertising models of their rifles in Blackoutq, they were not going ahead with production as they could not achieve the accuracy they desired.....
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
Re: Silent and slippery: subsonic handloads...
I would opt for a roll your own type of thing, maybe base it on a 9,3 Mauser but use 30-06 brass expanded to take a cast boolit of around 350-275 grains.
- meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Re: Silent and slippery: subsonic handloads...
ooman: tell us more of these mythical cast boolits of which thou speakest...
Our thinking is that we need a big, heavy aerodynamic bullet and a small to medium size case. The powder might best be a slow to moderate burner, with just enough of it used to fill the case (to prevent secondary detonation).
Our thinking is that we need a big, heavy aerodynamic bullet and a small to medium size case. The powder might best be a slow to moderate burner, with just enough of it used to fill the case (to prevent secondary detonation).
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Re: Silent and slippery: subsonic handloads...
.223 expanded to .308 then as per the Whisper.
- Sandgroper
- Full-Bore UK Supporter
- Posts: 4735
- Joined: Sat Nov 06, 2010 3:45 pm
- Location: Stanley, Falkland Islands
- Contact:
Re: Silent and slippery: subsonic handloads...
Just use a 168 grain A-Max bullet (308 Win) with 8gr of titegroup, as per the Hodgdon data - that's what I did and it works a treat. :shakeshout:
You then have the option of switching from subsonic to full power and back again.
You then have the option of switching from subsonic to full power and back again.
“The standard you walk past is the standard you accept.”
Lieutenant General David Morrison
I plink, therefore I shoot.
Lieutenant General David Morrison
I plink, therefore I shoot.
- meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Re: Silent and slippery: subsonic handloads...
Hmmm, ovenpaa, why not start off with a 7.62 cartridge to begin with, say NATO x51 or even a tiddly little Soviet x39, and pop a big, long cast boolit in it, seated well back into the case with just enough powder to give it a 1,100 fps kick up the boat-tail ?
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
- meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Re: Silent and slippery: subsonic handloads...
Sandgroper wrote:Just use a 168 grain A-Max bullet (308 Win) with 8gr of titegroup, as per the Hodgdon data - that's what I did and it works a treat. :shakeshout:
You then have the option of switching from subsonic to full power and back again.
Sounds like a good start. How does it do at 300 yards?
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Who is online
Users browsing this forum: Google [Bot] and 8 guests