This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
ukrifleman wrote:A pity GP11 is berdan primed, my last batch of GP11 from Chris was £37/100.
I have dealt with C&G for a number of years, and I am sure that the price he paid for the latest batch is a lot higher than the last one.
If there is one thing about Chris and his team, it is that he supplies quality goods at competitive prices, (I have bought 4 rifles from him and a fair bit of ammo so I know!)
It is just another example of price hikes.
ukrifleman.
I have plenty of cases that a friend brought in from Swizerland and I reload them with no problem.These cases are very good dimension wise
Filippo
