I had to prime 1000 unfired PPU 308 cases at work last week. I did the first 800 with a Lee Hand Primer. I got blisters on my fingers and cuts on each thumb (I alternated which hand I used to make it easier!). I then brought my RCBS Hand Primer from home for the last 200. Much easier to use as it has a longer arm so less force is required.
Just my 2p!
Non Lee hand primer
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Dr. Strangelove
- Posts: 363
- Joined: Wed Dec 14, 2011 10:46 pm
- Location: North Yorkshire
- Contact:
-
j0e_bl0ggs
Re: Non Lee hand primer
Raiha priming tool, really nice to use. Easy on the paws, downside no tray feed!
Not made any-more!
Not made any-more!
Who is online
Users browsing this forum: No registered users and 8 guests