I use Vecan AS from Peter Lawman, similar price to GM3. Several friends use both also and we are shooting 298 and above all day long. Same goes for unique.
As Dromia said, it's all about what works for you.
.357 loading advise
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Mike357
- Posts: 3637
- Joined: Sat Dec 04, 2010 7:25 pm
- Home club or Range: NRA, Bisley, Dundee Rifle & Pistol Club & Bishop Auckland GC
- Location: Near Durham(ish)!
- Contact:
Re: .357 loading advise
It's not the pace of life that concerns me, it's the sudden stop at the end!
-
mr smith
- Posts: 800
- Joined: Wed Mar 02, 2011 2:10 pm
- Home club or Range: Dundee Rifle and Pistol Club
- Contact:
Re: .357 loading advise
Mike357 wrote:I use Vecan AS from Peter Lawman
Talking of which Mike are you wanting any just now or are okay for the noo.
-
Mike357
- Posts: 3637
- Joined: Sat Dec 04, 2010 7:25 pm
- Home club or Range: NRA, Bisley, Dundee Rifle & Pistol Club & Bishop Auckland GC
- Location: Near Durham(ish)!
- Contact:
Re: .357 loading advise
I'll take a tub to top up my stock. Cheers.
It's not the pace of life that concerns me, it's the sudden stop at the end!
-
dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: .357 loading advise
http://modomirino.blogspot.co.uk/2009/1 ... t-gm3.html
This would be a starting point if I were to use it by comparing shotshell loads with their equivalents in Alliant (or other) powders.
I put this on ref GM3 powder - the wrong thread I believe, so sorry for that.
This would be a starting point if I were to use it by comparing shotshell loads with their equivalents in Alliant (or other) powders.
I put this on ref GM3 powder - the wrong thread I believe, so sorry for that.
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
-
Tidyonafriday
Re: .357 loading advise
Hi Mike357,
What does it cost you to have powders delivered from Peter lawman for the Vecan powders ?
Would like to give this a go.
Cheers everyone for the replies.
:goodjob:
What does it cost you to have powders delivered from Peter lawman for the Vecan powders ?
Would like to give this a go.
Cheers everyone for the replies.
:goodjob:
-
mr smith
- Posts: 800
- Joined: Wed Mar 02, 2011 2:10 pm
- Home club or Range: Dundee Rifle and Pistol Club
- Contact:
Re: .357 loading advise
Tidyonafriday wrote:Hi Mike357,
What does it cost you to have powders delivered from Peter lawman for the Vecan powders ?
Would like to give this a go.
Cheers everyone for the replies.
:goodjob:
From memory from about two years ago it was about £17 for a good amount,not all was the easiest guy to get a hold of.One of the guys from my club has just ordered powder from him and he didn't have any AS left.
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: .357 loading advise
He has GM3, my friend's just rang to say he's picked up my order for me and is on the way home so I'll try and get out of the house tomorrow and go pick it up then try some .44s, starting load will be 200g plated bullet over 5.4gr, same powder weight as I use with TiteGroup but at less than half the cost!.
There's room for all Gods creatures, next to the mash and gravy :)
Who is online
Users browsing this forum: No registered users and 3 guests