Cleaning after moly
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
zeroveez
Cleaning after moly
Having just read the eighty or so posts on moly, I hope that I will be forgiven in asking " why does one have to clean a barrel so scrupulously after using moly coated bullets prior to going back to non coated rounds" ? From time to time I shoot my own home load and home mollied rounds through a Swing/ Bartlein TR barrelled rifle. (Ruag is now a £1.00 a bang). Mollying became a habit, having read several US sites, and using it in my MR rifle. How does mollying "contaminate" the barrel?
Re: Cleaning after moly
I Moly my own rounds in my AI and shoot Milsurp from time to time and do no scrubbing between the two.
Who is online
Users browsing this forum: No registered users and 7 guests