Full Length Size - All the same size?

[phaedra1106]

Rifle is brand new out of the box so chambered at factory. Local gunsmith reckons that it's right on the spec limit and agrees that's a good thing, as it chambers cases sized with the modified Lee die I can just keep using that. I'll see if anyone has an RCBS small base set or Hornady dies which are supposed to be small based as standard I beleive.

As I may be going back to the same dealer for a nice s/h Steyr Scout they have in .223 I was thinking of taking it back at the same time but as it chambers factory ammo they may not accept there's a problem.

[rox]

Rifle is brand new out of the box so chambered at factory. Local gunsmith reckons that it's right on the spec limit and agrees that's a good thing, as it chambers cases sized with the modified Lee die I can just keep using that. I'll see if anyone has an RCBS small base set or Hornady dies which are supposed to be small based as standard I beleive.

Have you measured the case headspace of a case that has been fired in the rifle?
Have you measured the case headspace of a case you have resized?

These measurements ought to identify whether the problem lies with the chamber or with your die setup.

..

[simong]

Afternoon peeps,

This may have nothing too do with the price of fish but.... I too have a Howa 1500 axiom in 308 and my niggle is not with reloads or using once fired Ruag from Peter Lawman, but its trying to close the bolt on new PPU .
The bolt will close and lock but it feels fairly stiff.
Once I have some cases fire formed and neck sized they load as smooth as anything. ( dies are Lee and press Wamadet)

ttfn
the greek