8x58RD shell holder - which one do I need
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
8x58RD shell holder - which one do I need
Can anyone tell me what size shell holder I need for the 8x58RD please? I need to order a couple for .223 so may as well add some for the Krag.
-
dromia
- Site Admin
- Posts: 20224
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: 8x58RD shell holder - which one do I need
I git mine from CH 4D, a lee 18 could do at a pinch.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: 8x58RD shell holder - which one do I need
Just checked John, they do not list anything remotely like the 8x58RD, Dromia the Lee 18 is listed as suitable for the 11x60 which has a rim diameter +.010" and body diameter +.0250" which is reasonably close. I was going to order one when I ordered a set of dies from CH4D however I am thinking of buying a reamer and some Die blanks from PTG and making my own hence asking.
Re: 8x58RD shell holder - which one do I need
Ovenpaa if it is 8x58R for a Danish Krag it should be a RCBS number 14 shellholder which is a Lyman 17 or Hornady 14.
If it is 8x58R/.318 the shellholder is RCBS 2 or Lyman 6, Hornady 2, Lee 3.
If it is 8x58R/.318 the shellholder is RCBS 2 or Lyman 6, Hornady 2, Lee 3.
-
dromia
- Site Admin
- Posts: 20224
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: 8x58RD shell holder - which one do I need
The Hornady 14 is as good a fit as the Lee 18 , just tried them.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Who is online
Users browsing this forum: No registered users and 1 guest