Since switching to a " small primer " calibre , ive now realised im missing the plastic piece which you change on a hand priming tool to go from small to large primers . Its the piece which guides the plunger up underneath thr shell holder to push the primer in ..
Does anyone have one or know where i can get one from locally ???
Cheers in advance !
RCBS hand primer part needed !!
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: RCBS hand primer part needed !!
I might have one, I will check now.
-
mattrem700
Re: RCBS hand primer part needed !!
John MH wrote:Email RCBS and they'll probably send you one FOC
Good thinking !!
Re: RCBS hand primer part needed !!
Or PM me your address and I will pop one in the post in the morning 
Who is online
Users browsing this forum: No registered users and 2 guests