OAL
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: OAL
I was having the same problem with 'budget' bullets in my .303, as the bullet tips varied in length. I got the Hornaday comparitor that fits to calipers, and Ovenpaa kindly made me a .311 insert for it - so now measuring from the ogive, it is much more consistant
-
Col
- Posts: 312
- Joined: Sat Jan 01, 2011 6:46 pm
- Home club or Range: BASC Sevenside range, stalking etc
- Location: South Wales
Re: OAL
tikkathreebarrels I use one of these
http://www.sinclairintl.com/.aspx/pid=3 ... omparators
which, when used consistently, gives good data
Sorry to be a pain guys, Is there any place in the UK I can get one of theses which suits both my 308s and my 223 (224). I found them on Brownell but from the states,I am sure I could get one her from somewhere
http://www.sinclairintl.com/.aspx/pid=3 ... omparators
which, when used consistently, gives good data
Sorry to be a pain guys, Is there any place in the UK I can get one of theses which suits both my 308s and my 223 (224). I found them on Brownell but from the states,I am sure I could get one her from somewhere
We are the pilgrims master,We shall go always a little further
Who is online
Users browsing this forum: No registered users and 3 guests