FAC listings "8mm" // "7.92mm"
Moderator: dromia
Forum rules
Should your post be in Grumpy Old Men? This area is for general shooting related posts only please.
Should your post be in Grumpy Old Men? This area is for general shooting related posts only please.
FAC listings "8mm" // "7.92mm"
Hi all.
Thought I'd share, as we know the different counties we live in, and sometimes the SAME county, has different rules for FAC variations etc.
I've got an open variation for an "8mm" and a "7.5mm" - the 8mm I was looking for an M95 Stery-Mannlicher, but lately I've been eyeing up the Mausers again.
However, I've been thinking, there's no way I could get a Mauser, even if I have an "8mm" slot, because 1) we all know that the "8mm Mauser" is actually 7.92mm, even though it's known as the "8mm Mauser", mainly by our US friends, and 2) I already have a G98 Mauser on ticket which is listed as 7.92mm
However, yesterday I thought "sod it, no harm in asking" so I rang my FL Office who said they'd get the FLO to ring me. Just had a phone call from him and he said, basically "The 7.92 and 8mm Mauser are the same cartridge... just make sure if you buy one that it's listed as 8mm"
I was actually nicely surprised at that. Even though I have a 7.92mm Mauser, I can now look at "8mm" Mausers, even though they're the same cartridge. I was expecting that I'd have to send my FAC back and 1-for-1 the "8mm" to "7.92mm" or at least "7.92mm/8mm" but no.
This is typical? Anyone have anything similar?
Thought I'd share, as we know the different counties we live in, and sometimes the SAME county, has different rules for FAC variations etc.
I've got an open variation for an "8mm" and a "7.5mm" - the 8mm I was looking for an M95 Stery-Mannlicher, but lately I've been eyeing up the Mausers again.
However, I've been thinking, there's no way I could get a Mauser, even if I have an "8mm" slot, because 1) we all know that the "8mm Mauser" is actually 7.92mm, even though it's known as the "8mm Mauser", mainly by our US friends, and 2) I already have a G98 Mauser on ticket which is listed as 7.92mm
However, yesterday I thought "sod it, no harm in asking" so I rang my FL Office who said they'd get the FLO to ring me. Just had a phone call from him and he said, basically "The 7.92 and 8mm Mauser are the same cartridge... just make sure if you buy one that it's listed as 8mm"
I was actually nicely surprised at that. Even though I have a 7.92mm Mauser, I can now look at "8mm" Mausers, even though they're the same cartridge. I was expecting that I'd have to send my FAC back and 1-for-1 the "8mm" to "7.92mm" or at least "7.92mm/8mm" but no.
This is typical? Anyone have anything similar?
Re: FAC listings "8mm" // "7.92mm"
I applaud you for contacting your FET and asking their thoughts first. We get a lot of people asking questions on the forum trying to second guess what their FET's are going to say or do when all they need to do is pick up the phone.
Make sure that whatever ammunition you need is the same calibre as on the FAC, My FAC has .308/7.62 & .223/5.56, I don't know if they will do similar for you,
DM
Make sure that whatever ammunition you need is the same calibre as on the FAC, My FAC has .308/7.62 & .223/5.56, I don't know if they will do similar for you,
DM
Re: FAC listings "8mm" // "7.92mm"
Cheers, and yup, my ammunition is correct on my FAC.
The 7.92 Mauser I have has the standard; Buy 500, Keep 600, and it's the same for the "8mm" ammo, though tbh, I'll probably just reload.
Don't think I've bought factory ammo since about 2010 :lol: Can you tell how much FB shooting my club does?
The 7.92 Mauser I have has the standard; Buy 500, Keep 600, and it's the same for the "8mm" ammo, though tbh, I'll probably just reload.
Don't think I've bought factory ammo since about 2010 :lol: Can you tell how much FB shooting my club does?
Re: FAC listings "8mm" // "7.92mm"
One of our club chaps who's in the Sussex Police area has just been refused .308/7.62, they want him to specify which one. I was surprised, as mine is the same as yours DM.Dangermouse wrote:Make sure that whatever ammunition you need is the same calibre as on the FAC, My FAC has .308/7.62 & .223/5.56, I don't know if they will do similar for you,
- Sandgroper
- Full-Bore UK Supporter
- Posts: 4735
- Joined: Sat Nov 06, 2010 3:45 pm
- Location: Stanley, Falkland Islands
- Contact:
Re: FAC listings "8mm" // "7.92mm"
I try to keep my requests as broad (or as vague
) as possible and so far Grampian has played along. For example my spare 22rf slot and ammo is just listed as .22 - so realistically, I could get any .22 (and ammo) RF or CF.
If I thought about getting Mauser I would probably ask for a 7.92/8mm with a letter explaining the wording of the request.
Thinking about it, the accompanying letter with any variation is probably what swings in my favour as it gives me the opportunity to fully present my case and any anomalies beforehand. It heads off any arguements, shows I'm serious because I've thought enough about it to write extra and I'm doing most of the work for them.
I've only specifically asked for a cartridge three times, first time was .223/5.56 because I didn't know any better, I now have a slot for .22CF. The second was for a plain .303, although I was tempted to ask for .303/.311/7.7mm but thought better of it.
The last time was for the 8x56R. That gave them the opportunity to find out how unusual the round was and again to show them I was serious.
For me it boils down to how well you understand the law, your relationship with Firearms Licensing and your RFD.
HTH

If I thought about getting Mauser I would probably ask for a 7.92/8mm with a letter explaining the wording of the request.
Thinking about it, the accompanying letter with any variation is probably what swings in my favour as it gives me the opportunity to fully present my case and any anomalies beforehand. It heads off any arguements, shows I'm serious because I've thought enough about it to write extra and I'm doing most of the work for them.
I've only specifically asked for a cartridge three times, first time was .223/5.56 because I didn't know any better, I now have a slot for .22CF. The second was for a plain .303, although I was tempted to ask for .303/.311/7.7mm but thought better of it.

The last time was for the 8x56R. That gave them the opportunity to find out how unusual the round was and again to show them I was serious.
For me it boils down to how well you understand the law, your relationship with Firearms Licensing and your RFD.

HTH
“The standard you walk past is the standard you accept.”
Lieutenant General David Morrison
I plink, therefore I shoot.
Lieutenant General David Morrison
I plink, therefore I shoot.
- bnz41
- Posts: 1990
- Joined: Sat Nov 06, 2010 4:20 pm
- Home club or Range: NRA Bisley
- Location: Essex
- Contact:
Re: FAC listings "8mm" // "7.92mm"
Hi Tower.75.
Not looking to get a Mauser are you? joining the odd group.... :lol:
I already have a 7.92 Mauser, and thought about getting another, so on doing my variation I put down 8x57..On finding a G98 advertised as 7.92 Mauser I asked the dealer if it could be written on my cert as 8x57, he said as they are the same no problem. Which means I also get double the ammo amount allowed 500 each...
Not looking to get a Mauser are you? joining the odd group.... :lol:
I already have a 7.92 Mauser, and thought about getting another, so on doing my variation I put down 8x57..On finding a G98 advertised as 7.92 Mauser I asked the dealer if it could be written on my cert as 8x57, he said as they are the same no problem. Which means I also get double the ammo amount allowed 500 each...
Re: FAC listings "8mm" // "7.92mm"
:lol: Keep forgetting there's more then one forum out there!
But, yes. "Possibly" thinking about another Mauser. A carbine too. Probably something to look at after I return from USland. Or maybe I'l look while I'm out there
But, yes. "Possibly" thinking about another Mauser. A carbine too. Probably something to look at after I return from USland. Or maybe I'l look while I'm out there
- meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Re: FAC listings "8mm" // "7.92mm"
Warwickshire Police are pretty good - maybe because their bangstick department actually seem to know a little about guns. When I applied for a series of variations I included a letter mentioning the different names for what was essentially the same calibre. They gave me variations for ".22RF", "7.62" and "7.92" and made it clear that they didn't mind which flavour of those calibres I purchased just so long as it was correctly recorded on my certificate and the ammunition was properly identified.
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Who is online
Users browsing this forum: No registered users and 8 guests