I expect to shoot (and reload) a total of between 2-300 rounds of .303 and 7.62 per annum. Given that that's a fairly small amount can anyone advise me on a suitable trimmer and case cleaner?
Hannam's have some reasonably priced Lyman stuff but I'm not sure which of the two or three options would be best.
Advice regarding case trimmer and case cleaner please.
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
bnz41
- Posts: 1990
- Joined: Sat Nov 06, 2010 4:20 pm
- Home club or Range: NRA Bisley
- Location: Essex
- Contact:
Re: Advice regarding case trimmer and case cleaner please.
I use both Lyman tumbler and trimmer, and they have never let me down, and I do reload a lot (1000+ a year)... Tumbler is Pro 1200 turbo & Trimmer is the universal with the multi pack of pilots (get the drill adaptor shaft) saves your arm.
Last edited by bnz41 on Mon Feb 20, 2012 9:56 am, edited 1 time in total.
-
Tower75
Re: Advice regarding case trimmer and case cleaner please.
I can only advise on what I use, but a proper case trimmer runs to about £100
Where as a LEE case trimmer and case guage are about £20.00 - You stick your LEE case holder into an electric drill, insert the case in the holder, screw the case gauge into the trimmer and place the whole assembly into the case mouth. You hold the trimmer with your hand and turn the drill on.
This cuts the cases fine.
As to cleaner, well, I took the advise on this forum, I stick my cases in a sock and bung 'em in the washing machine.
Where as a LEE case trimmer and case guage are about £20.00 - You stick your LEE case holder into an electric drill, insert the case in the holder, screw the case gauge into the trimmer and place the whole assembly into the case mouth. You hold the trimmer with your hand and turn the drill on.
This cuts the cases fine.
As to cleaner, well, I took the advise on this forum, I stick my cases in a sock and bung 'em in the washing machine.
-
Watcher
Re: Advice regarding case trimmer and case cleaner please.
Really!Tower.75 wrote: As to cleaner, well, I took the advise on this forum, I stick my cases in a sock and bung 'em in the washing machine.
-
bnz41
- Posts: 1990
- Joined: Sat Nov 06, 2010 4:20 pm
- Home club or Range: NRA Bisley
- Location: Essex
- Contact:
Re: Advice regarding case trimmer and case cleaner please.
When you have trimmed the cases you will need to deburr inside and outside of the neck, so you will need a deburring tool.
Tower.75, Cheesey cases :shakeshout:
Tower.75, Cheesey cases :shakeshout:
Last edited by bnz41 on Mon Feb 20, 2012 10:06 am, edited 2 times in total.
-
Tower75
Re: Advice regarding case trimmer and case cleaner please.
Yup.Really!
I said that at first too. I cannot remember who gave me the advise now, sorry.
But take some old socks, double them up, and load them with cases. Stick them in your normal wash, they come out very clean, then just leave them to dry.
-
Watcher
Re: Advice regarding case trimmer and case cleaner please.
That might need some careful negotiation but we'll see.
-
greenshoots
Re: Advice regarding case trimmer and case cleaner please.
i use lee stuff cheap and it does the job, allows me to spend money where its really needed ........on new rifles, also use a ultra sonic for cleaning cases
greenshoots
greenshoots
-
Geordie bloke
Re: Advice regarding case trimmer and case cleaner please.
Hi Watcher. For trimming I use the Sinclair trimmer (manual) which keeps the case held in a case holder and then just chamfer with an RCBS tool which does the job nicely.
For cleaning I use an Ultrasonic cleaner which I preferred over the tumbler.
Les
For cleaning I use an Ultrasonic cleaner which I preferred over the tumbler.
Les
-
Watcher
Re: Advice regarding case trimmer and case cleaner please.
Geordie,
Which ultrasonic do you use?
W
Which ultrasonic do you use?
W
Who is online
Users browsing this forum: No registered users and 3 guests