Anyone using IMI Trail Boss?

[hakeswill]

I am starting reloading and I am thinking of using Trail boss powder for loading .45 Colt (SAA pistol) and was wondering if anyone has any experience with it?

Looks good for filling up the .45 colt case and preventing overcharging and quite a lot of the cowboy shooters in the US seem to be recommending it so I thought it might be a good powder to try first?

[saddler]

Viht also do a similar powder called TinStar

[Mike357]

I know a bloke that uses TB in 45 LC. Uses it for Gallery Rifle. Seems to work well for him.

[hakeswill]

Not seen the tinstar will look it up.

The velocities on the TB look very low compared to other powders, how would this affect accuracy?

Also it says it is designed for shooting lead bullets with cowboy action loads does this mean you shouldn't use it with copper plated bullets? My lee book with load data seems to have very little data with regards to copper plated/jacket rounds and only lists two powders to use with them and not sure why.

[Ballistol]

Hi,

I use it in a .45LC Marlin cowboy competition.

Velocity is low, but accuracy is very impressive at least in 25yd gallery range with virtually no recoil allowing for very fast shots to be taken. Be aware though, the tub is only 9oz, not 1lb.

[hakeswill]

Hi,

I use it in a .45LC Marlin cowboy competition.

Velocity is low, but accuracy is very impressive at least in 25yd gallery range with virtually no recoil allowing for very fast shots to be taken. Be aware though, the tub is only 9oz, not 1lb.

Yea I did notice it comes in 9oz but if I have done my sums correct then it only works out at about £1 extra per 100 shots compared to titegroup.

How do you find it compared to other powders you have used? Does it burn quite clean? Are you using cast lead bullets?

[Individual]

How do you find it compared to other powders you have used? Does it burn quite clean? Are you using cast lead bullets?

I like it.

I'd say it burns just as well as anything else I've ever used.

You should only use it with lead bullets, it doesn't really have enough kapow for jacketed - ask me how I know

[hakeswill]

How do you find it compared to other powders you have used? Does it burn quite clean? Are you using cast lead bullets?

I like it.

I'd say it burns just as well as anything else I've ever used.

You should only use it with lead bullets, it doesn't really have enough kapow for jacketed - ask me how I know

Ok im interested what happened with the jacketed bullet ?

Is titegroup ok to use the jacketed bullets?

[greenshoots]

trailboss mark seating depth of the bullet your using on the outside of the case, fill case to this line thats your 100% load, weigh and 70% of this is your starting load work up your load as normal........

greenshoots

[Ballistol]

Hi,

I use it in a .45LC Marlin cowboy competition.

Velocity is low, but accuracy is very impressive at least in 25yd gallery range with virtually no recoil allowing for very fast shots to be taken. Be aware though, the tub is only 9oz, not 1lb.

Yea I did notice it comes in 9oz but if I have done my sums correct then it only works out at about £1 extra per 100 shots compared to titegroup.

How do you find it compared to other powders you have used? Does it burn quite clean? Are you using cast lead bullets?

Meters pretty well, certainly notice the powder in the case, couldn't really double charge and burns cleanly.

I was using 250g lead RNFP, made by ACE bullets.