Next project
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Next project
I ended up making the platform for the gas torch instead... A bit more work yet but it is looking OK so far.
Re: Next project
Thats all looking really good Dave - So how are you going to finish it, Engine turned, anodised, polished or natural?
Now you just need a little clicky gizmo the racks up a counter as they drop down the hole.
Now you just need a little clicky gizmo the racks up a counter as they drop down the hole.
Re: Next project
Engined turned, Hmmm......... I need a Rose Engine 
I think the only option I have discounted is Hammerite...
I think the only option I have discounted is Hammerite...
Re: Next project
Good timing, these just turned up in the post. Downside is I have developed man flu so today is not going to be a quality shed day.
Re: Next project
Sounds like your body is telling you to have a rest.
Hope you feel better soon.
Hope you feel better soon.
Never say something in Cyberspace you can't say Face to Face!!
Type a message, post your news,
Disagree with other members' views;
But please, do have some decorum,
When debating on the Full-Bore Forum.
Type a message, post your news,
Disagree with other members' views;
But please, do have some decorum,
When debating on the Full-Bore Forum.
-
Scotsgun
Re: Next project
Those look like neat motors, especially with the integrated gearbox. Were they expensive?
-
Christel
- Site Admin
- Posts: 17530
- Joined: Fri Nov 05, 2010 7:52 pm
- Location: Wind Swept Denmark
- Contact:
Re: Next project
I keep telling him but he is not listening, I think he is on a mission.bobbob wrote:Sounds like your body is telling you to have a rest.
Hope you feel better soon.
:G
Re: Next project
Two including delivery for GBP19.00. They are 24vDC 10RPM one for the turning station and one for the drive, they are available from 600RPM down to 6RPM with a good spread of output speeds in-between. I am impressed with the build quality as well as the price, they are put together very nicely and ideal for little projects like this.Scotsgun wrote:Those look like neat motors, especially with the integrated gearbox. Were they expensive?
EDIT - They were from eBlag, look for 37mm 24V DC 10RPM Gear Box Motor
Re: Next project
Just checked, they were actually GBP19.00 for the two plus GBP4.50 for the two posted, so GBP23.50 total.
Who is online
Users browsing this forum: No registered users and 5 guests