.323 to .329 cast boolits
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
.323 to .329 cast boolits
One for the cast boolits purveyors. can I get cast booilts in the .323" to .329" range? Around 200 grains is good and can they be sized to a specific size?
-
dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: .323 to .329 cast boolits
That would be a limited yes. Up to around .325 with my mould at 220 ish gr. Sized to what you want. Larger is possible but not too easy as a spacer has to be inserted between the mould blocks!ovenpaa wrote:One for the cast boolits purveyors. can I get cast boolits in the .323" to .329" range? Around 200 grains is good and can they be sized to a specific size?
Alternatively a special mould. Lyman made a 328371 mould - look it up:
http://www.three-peaks.net/bullet_molds.htm
ATB
dodgyrog
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
Re: .323 to .329 cast boolits
I will come and have a chat this weekend 
-
dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: .323 to .329 cast boolits
See you there.
Bring weak milky tea with no sugar. LOL :goodjob:
Bring weak milky tea with no sugar. LOL :goodjob:
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
-
Sandgroper
- Full-Bore UK Supporter
- Posts: 4735
- Joined: Sat Nov 06, 2010 3:45 pm
- Location: Stanley, Falkland Islands
- Contact:
Re: .323 to .329 cast boolits
Lee do a mold for the 8x56R which is .329 and 205 grains.
I shall be investing in one in the new year after I pay for, and Dromia drops of the Steyr M95/30 I'm buying from him.
I shall be investing in one in the new year after I pay for, and Dromia drops of the Steyr M95/30 I'm buying from him.
“The standard you walk past is the standard you accept.”
Lieutenant General David Morrison
I plink, therefore I shoot.
Lieutenant General David Morrison
I plink, therefore I shoot.
-
dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: .323 to .329 cast boolits
Well spotted that man! I hadn't noted that one before.Sandgroper wrote:Lee do a mold for the 8x56R which is .329 and 205 grains.
I shall be investing in one in the new year after I pay for, and Dromia drops of the Steyr M95/30 I'm buying from him.
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
-
dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: .323 to .329 cast boolits
That's from NEI - probably a better one.
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
Re: .323 to .329 cast boolits
dodgyrog wrote: Bring weak milky tea with no sugar.
You bringing a woman or a small child to help you? :lol:
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
-
dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: .323 to .329 cast boolits
Your boolits just doubled in price to pay for the woman and small child!!!
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
-
Sandgroper
- Full-Bore UK Supporter
- Posts: 4735
- Joined: Sat Nov 06, 2010 3:45 pm
- Location: Stanley, Falkland Islands
- Contact:
Re: .323 to .329 cast boolits
:lol: :lol: :lol:dodgyrog wrote:Your boolits just doubled in price to pay for the woman and small child!!!
“The standard you walk past is the standard you accept.”
Lieutenant General David Morrison
I plink, therefore I shoot.
Lieutenant General David Morrison
I plink, therefore I shoot.
Who is online
Users browsing this forum: Google [Bot] and 6 guests