A few pics.
The core cutter.
Regards
Peter.
Bullet swaging
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Bullet swaging
A member of our club has left some stuff at the club to dispose of with the proceeds going to club funds. Among the bits not sold is a box containing bullet swaging stuff. This has been there a while and no-one seems interested in it. Out of curiosity, I have brought it home to have a look to see what is in the box. There is a selection of stuff. There are about 1000 .30 cal copper jackets, about 2000 .243 cal copper jackets, a lead core cutter, some lubricants, 3 spools of 5mm lead wire, some swaging books and a two piece bullet swaging die that was made by Gilly Howe. I have no idea how the die works, because the swaging videos I have seen seem to use a big powerful press. It looks to be a lot of faff to do, so I will take this lot back to the club. I can see it being useful to make some obscure bullet, but not for your normal stuff. I presume it has a value to someone, but not for me.
A few pics.
The core cutter. Lead wire. Copper jackets. More pics to follow.
Regards
Peter.
A few pics.
The core cutter. Lead wire. Copper jackets. More pics to follow.
Regards
Peter.
Re: Bullet swaging
More pics.
Books on swaging.
Swaging die.
Swaging die unscrewed apart.
If anyone can add any info about this stuff, I would be interested.
Regards
Peter.
Books on swaging.
Regards
Peter.
Re: Bullet swaging
Ask where the press is. The forces required for swaging jacketed bullets are well beyond the capability of most reloading presses.
"Consciousness is a lie your brain tells you to make you think you know what you are doing." Professor Maria Goncalves.
If liberty means anything at all, it means the right to tell people what they do not want to hear. George Orwell.
If liberty means anything at all, it means the right to tell people what they do not want to hear. George Orwell.
-
FredB
- Site Supporter Since 2019
- Posts: 969
- Joined: Fri Dec 10, 2010 8:33 pm
- Home club or Range: stourport
- Location: Wolverhampton
- Contact:
Re: Bullet swaging
I stage mine in a small Lee press.
Fred
Fred
Who is online
Users browsing this forum: No registered users and 6 guests