NFDS 38/357 case expander

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
User avatar
Alpha1
Site Supporter Since 2020
Posts: 8553
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: NFDS 38/357 case expander

#11 Post by Alpha1 »

phaedra1106 wrote: Thu Apr 07, 2022 11:41 am I had the ACP and sold it as I just couldn't find a use for it that I couldn't already do on my other presses.

For de-priming or full length sizing I use the Rock Chucker with the In-Line Fabrication case ejector system, it really speeds things up :)

And I've remembered to post those cases off to you :)
Good when they arrive I will sort them out and send them back to you.
User avatar
Alpha1
Site Supporter Since 2020
Posts: 8553
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: NFDS 38/357 case expander

#12 Post by Alpha1 »

The cases are in the post.
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 9 guests